Micro Filling Systems 2-Head Bottling System
Micro Filling Systems 2-Head Bottling System
$1,599.00
- 2 head manual counter pressure bottle filler with individual actuating stainless steel filler heads.*
- 3 way stainless steel valves with purge, fill and off positions.
- Stainless steel pressure relief valves to fine tune filling rates.
- Easily removable stainless drip tray with barbed drain fitting for tube attachment
- HDPE mounting points to allow unit to be clamped or bolted to any desired surface.
- Food grade liquid and gas lines with stainless fittings and tees.
- Attachable to any carbonated beer, gas and cleaning solution source using many standard fittings.
- Fully adjustable height control to allow filling of many different bottle sizes (or even growlers!)
- Units are easily disassembled for servicing or additional cleaning.
*Other configurations may be available. Please contact us for options and costs.
Product Description
The system works similarly to any other counter pressure filling device out there, but with greater ease and at a fraction of the cost of a custom built manual system or the semi and fully automated systems. Designed with the single worker in mind our system requires only the most minimal amount of handling per bottle filled. Unlike most other manual models where all bottles are loaded at once and then the filling unit is clamped down on them before the filling process can begin, our system allows the worker to load from the bottom and fill each bottle individually and immediately. This not only allows bottles to be filling while others are being loaded, but also reduces down time as the worker no longer has to wait for all bottles to be filled before pulling them off the system to be capped, thereby increasing your bottles per hour significantly! The height of the filling heads is also easily adjusted by loosening a knob on either side of the unit and moving it up or down to fit a variety of bottle sizes and even growlers.*
*Growlers require a larger diameter bung available through most brewing supply vendors.
Documentation:
USER MANUAL
Warranty:
We warranty our system to be free of any defect upon delivery and to function properly. The warranty period is (1) years from date of delivery. Micro Filling Systems will furnish replacement parts which are part of the Micro Filling Systems hardware only. Micro Filling Systems is not responsible for any damage caused to the unit or its parts during disassembly.
Returns:
Due to the sanitation requirements and nature of food handling equipment we will accept a return of only unused units. Return shipping will be the responsibility of the purchaser. Please contact us to arrange any return or warranty claim.
Disclaimer:
Micro Filling Systems will not assume any liability for damages associated with the use of the system. It is the responsibility of the owner to be sure that any person using the system is fully trained on its use and proper sanitizing procedures
Safety:
Micro Filling Systems assumes no liability for damage or injury incurred by the improper installation and use of the unit. Please ensure the unit is properly and securely fastened to an appropriate work station and that the operator has been trained properly on its use and safety.
Shipping:
$50 flat rate to the contiguous 48 states. Customers in HI, AK and US Territories please contact directly us for shipping rates. International customers, please contact us for shipping rates to your country. All import taxes and VATs are the responsibility of the customer.
Additional Information
| Weight | 24 lbs |
|---|---|
| Dimensions | 32 × 8 × 8 in |
